Agitation + Transfer Pumps
prod_pump_lagooncrawler

Nuhn Lagoon Crawler

The Nuhn Lagoon Crawler is an amphibious vehicle designed for agitating lagoons. The wheels are able to drop down, giving the vehicle roughly 5 feet of ground clearance. The unit then drives itself into a lagoon, where it turns into an agitation boat. When in the lagoon, the Lagoon Crawler is powered by a quad […]

Continue Reading →
P1010221-1

Balzer Magnum Express Lagoon Pump

Standard Features: Magnum- Express models with V-6 and Veneroni Lower Housing available in single wheel sizes 33′ & 38′ and dual wheel sizes 43′ 48′ 58′ & 68′ Horizontally mounted pump with choice of V-6 or Veneroni Series pump 8″ x 8″ square tube frame 4″ drive line with greasable U-joint knuckles approximately every 10′ and 5′ o/c […]

Continue Reading →
vertical pump1

Nuhn Vertical Pit Liquid Manure Pump

Housing  Triple port design Having the liquid leave the housing in three locations allows for the liquid to get in and out of the housing at a high rate. This also uses the input power very efficiently as it is not wasted by moving liquid around in the housing Allows for a narrow, large diameter […]

Continue Reading →
DODA 2013 007

Doda Vertical Chopper Pump

Features Hot dipped galvanized nodular cast iron or AISI 304 stainless steel Oil bath driveline with separate pump housing stainless steel shaft Two piece tungsten carbide seal system Agitation nozzle with 320 degree horizontal and 90 degree vertical movement Patented chopping system with two static blades and one rotating chopper blade High speed impeller with adjustable pressure plate for secondary […]

Continue Reading →
DODA 2013 001

Doda Horizontal High Pressure Chopper Pump (AFI)

Features Nodular cast iron housing, not welded Vanadium and manganese alloy chopper blades Adjustable pressure plate and special impeller for secondary chopping Pedestal models set up for direct power source (electric, diesel, hydraulic) Heavy duty gearbox available in 540 and 1,000 rpm PTO pumps Internal check valve on suction cone allowing startup without re-priming Vertical head […]

Continue Reading →

Nuhn Header Series Lagoon Pump

Housing Triple port design Having the liquid leave the housing in three locations allows for the liquid to get in and out of the housing at a high rate. This also uses the input power very efficiently as it is not wasted by moving liquid around in the housing Allows for a narrow, large diameter […]

Continue Reading →

Balzer V6 High Volume Pit Pump

Experience the most durable and dependable high capacity pump available.  Our unique impellor design cuts through the clutter to keep your pump at full flow. 6″ Pump Specifications: Performance: Up to 4000 gallons per minute Minimum Horse Power requirements: 120hp Sizes available: 8’, 10’, 12’ lengths (custom sizes upon request) Hitch Type: 2 point category II […]

Continue Reading →
buckhead lh front

Balzer Buckhead Horizontal Pump

High Volume • Low Pressure Standard Features: Welded Steel Pump Housing 20.5” Welded Steel Impellor Direct Drive (NO GEAR BOX) with PTO assembly 540 or 1000 rpm Automatic “Power Priming System” includes vacuum pump Welded Steel Intake Cone with One way check valve Two wheel trailer Tee Manifold with one(1) 4″ and one(1) 6” Brass […]

Continue Reading →
LTS copy

Balzer Veneroni Vertical Slurry Pumps

PTO Models Balzer offers a variety of products for your agitation and loading systems including but not limited to V-6 pumps, V-8 pumps, Lagoon Pumps, Lagoon Props, Veneroni Pumps and much more. Put tomorrow’s technology to work for you today. Count on one of Veneroni/Balzer’s Vertical Slurry Pumps to handle your toughest slurry jobs. No […]

Continue Reading →