Nuhn air system combines muffler, air cleaner, oil catch, automatic air reverse and exhaust under tank, away from operator
Balanced air traps for fast pumping
The number or size of the pump does not matter if the air system is not balanced or if there are any restrictions in air flow
Vacuum pressure gauge
Vacuum pump is portected by a two stage trap system
Tank
1/4″ tank
Unibody construction, solid welds inside and out
Full circle, tensioned baffles
Circular shaped tank keeps center of gravity low as opposed to a mushroom shaped tank with the center of gravity very high
Large, 5″ bubble type sight gauge on tank
Extra inlet ports at front and rear of tandem models
Full light kit
Lights are to the outside of the tires and are designed to break away if they hit something
Large 20″ Rear Door
Nuhn tanks are sandblasted to bare metal, removing the mill scale
Sandblasting is far superior to a chemical wash
Frame
1/4″ Solid construction frame
Full cross members
Nuhn full cross members create a cradle for the tank, and bridge the tank and the two side frame pieces together. Other systems with just the two rails and no cross members have no structural integrity between the two rails.
Extra support where tandem joins frame
Tandem
Solid alloy spindles
Nuhn spindles are welded directly into the main beam, eliminating weak points. Most tanks in the industry have its spindles mounted with a series of several parts on the end of the beam.
Heaviest axle in the industry
Large diamond tread tires
Optional Radial tires available
Most spreaders in the indusrty are approximately 13’ wide compared to the Nuhn tank which is 11’11” wide. This narrower track gives stability and at the same time, matches the road width and tractor width. This makes the Nuhn Magnum better for traveling on the road.
Grease bank on side of frame to allow greasing the internal parts of the undercarriage easily
8’6″ Tongue
Long tongue creates better handling, stability, better visibility